ClubSwan 36 is the most innovative entry-level one design sports boat of its era

 

From the America’s Cup to the Olympics via the Volvo Ocean Race, sailing is redefining itself.

Club Swan 36 -
Club Swan 36; photos: clubswan36.com

Nautor’s Swan and Argentinean naval designer Juan Kouyoumdjian launched ClubSwan 36 – a statement boat delivering something exceptional and innovative. According to its designer, ClubSwan 36 offers a style of sailboat racing that combines performance and innovation within an environment of traditional, close contact sailing, all the while remaining accessible to amateur.

According to Juan Kouyoumdjian, “The ClubSwan 36 should be regarded as a big dinghy, more so than a smaller version of a big yacht such as a TP52 or Maxi 72. Combining a very light configuration, a very versatile rig and a curved foil allows for the boat to have several modes of sailing depending on the conditions. From achieving negative leeway upwind to skimming, foil-assisted off the wind, this boat has all the tools required to provide an avid racing sailor the feelings and emotions of yacht racing at its best“.

Club Swan 36 - 2018
Club Swan 36; photos: clubswan36.com

Impressive technical parameters

Looking beneath the gloss, the technical prowess of the ClubSwan 36 is apparent: flush deck, open cockpit and retractable bowsprit; chamfered bow to lower CG and to cut aero drag and weight; the transverse sliding C-foil, offering side force and lift in varying degrees depending on the angle of heel; and, the “soft” carbon rig providing a myriad of tuning opportunities.

The ClubSwan 36 C-foil is symmetrical, residing in an unobtrusive, internal trunk. With the boat weighing 2.5 tonnes, it is going to be very fast downwind. Upwind the foil will efficiently create side-force turning the keel fin into just a bulb holder. And, the drag downwind will be minimal.

The C-foil is deployed using a block-and-tackle system. Downwind it becomes a central component in determining optimal trim. Generating some side force when the boat is heeled means it is a boat that responds positively to heeling downwind. This has advantages in getting the twin rudders in line with the water flow.

While the foil will cause most heads to turn, the more interesting aspect is probably the rig. The mast has only one set of spreaders to allow more flexibility and a wider range of tuning options. It is deck-stepped and setting the rake will be a critical component of both upwind and downwind sailing. The position of the mast base is adjustable to change the mast’s behaviour when runners are loaded. The shroud bases are further forward than one might normally expect and the mainsail is a key element in the structure.

Club Swan 36 - 2018-
Club Swan 36; photos: clubswan36.com

All in all, the rig is where the fusion between dinghy and keelboat sailing is clearest. In light winds the sails can be deepened to increase power; in a breeze, the sails can be flattened to depower. It is a mast that encourages experimentation and will appeal to the technically minded.

The ClubSwan 36 class rules are in development, but one principle central to all Swan One Designs has been settled from the outset. This is a strict amateur Owner/Driver class with a maximum of 50% the crew being professionals. The aim being to encourage the virtues of Corinthian sailing.

When addressing the project, Enrico Chieffi, Vice President of Nautor’s Swan, past Olympian and former Star World Champion, is quick to emphasise that the ClubSwan 36 holds true to the longstanding philosophy of the established boat-building brand: “We have always been about delivering the very best possible sailing experience to our owners. Combining our considerable skill in building seaworthy yachts with the elegance and design flair of the moment. Incorporating new materials and technology that enhance the sensation of time afloat. Introducing innovations that change the way the industry thinks. The ClubSwan 36 covers all these and will be a fabulous addition to the Nautor’s Swan range and, in particular, the ClubSwan division.”

Leonardo Ferragamo, Chairman of Nautor’s Swan, is another enthusiastic proponent of the project and has been ever since the concept was first put forward: “We are always looking to open the world of Nautor’s Swan and the ClubSwan soul to an ever-larger audience and especially to the next generation of sailors. 52 years after the launch of the first Swan model, Nautor is introducing a fifth one design class: the ClubSwan 36.”

Club Swan 36 - technical
Club Swan 36; photos: clubswan36.com

Core place within ClubSwan and Swan One Design

The ClubSwan 36 offers more than great sailing. It is a direct route into one of the best clubs in the yachting world, immediately opening the door to the ClubSwan family and Swan One Design racing programme. As early as 2019, it will form a part of The Nations Trophy Leagues anticipated for the Mediterranean and the Baltic, plus The Nations Trophy itself scheduled for October in Palma. Ferragamo again, “The great success of the first edition of The Nations Trophy in Palma de Mallorca confirmed a new era for Nautor’s Swan’s racing soul. Next year, we will have a fleet of ClubSwan 36s racing in The Nations Trophy 2019, we will organize lots of events in the Med and we will create a circuit in the Baltic.”

Club Swan 36 - 2018-01
Club Swan 36; photos: clubswan36.com

 

 

The minimalist racing style machine: Ares Design for the BMW R nineT for those with an appetite for retro styling

  The world of mobility is evolving and, with the demand for personalisation growing, the need for innovative solutions for this ever changing segment is growing. Whether resurrecting iconic supercars, reimagining classic models from the past with bespoke conversions or offering modern day coach-building techniques to transform customer vehicles Modena-based luxury customization company Ares Design … Read more

First Edition: Mansory refined Velar with new wide body kit

  The Range Rover Velar, the 2017 addition to the Range Rover family, filling the white space between the Range Rover Evoque and the Range Rover Sport, is a striking beauty with great recognition value. Mansory, the luxury car modification firm based in Brand, Germany, still manages, however, to add tailor-made additional dynamism, presence and elegance to the … Read more

Alfa Romeo Mole Costruzione Artigianale 001 debuts at 2018 Salone Auto Torino – Parco Valentino

  This one-off Alfa Romeo Mole Costruzione Artigianale 001 made its public debut on June 6 at the Salone Auto Torino in Italy – Parco Valentino 2018. The new new and ambitious project is build by Mole, a new Torino-based brand, producing one off in limited editions meant for car collectors and engine lovers. Without … Read more

Collector’s edition vehicles: This one-of-a-kind F-150 Raptor inspired by the F-22 fighter jet sells for $300,000

F-22 Fighter Jet-Inspired, 545-Horsepower Ford F-150 Raptor Sells for $300,000 F-150 Raptor is the ultimate high-performance off-road truck – the toughest, smartest, most capable Raptor ever. Delivering 450 horsepower and 510 lb.-ft. of torque, Raptor’s exclusive Terrain Management System gives it superior agility. Ford’s design team created a Ford F22 F150 Raptor based on the … Read more

The official tuner to Mercedes-Benz is celebrating its 50th anniversary in a big way

A mere five car collectors will have the pleasure of parking this very special Customer Sports car in their garage. MERCEDES-AMG celebrates its 50th anniversary with Mercedes-AMG GT3 Edition 50, a collector’s item issued in just five units and, probably, already sold out. “The climax of the celebrations will be the unveiling of a new … Read more